Marble Tiled Floor Polish and Grout Refresh near Croydon

These photographs were taken at a house in Forestdale near Croydon in Surrey where we were engaged to clean and buff a dull Marble tiled floor; we were also asked to re-colour the grout which had become stained.

Marble Floor Before Polishing

Marble Tiled Floor Polishing

We used a set of diamond encrusted Twister Burnishing Pads fitted to a rotary buffing machine to polish the floor. The pads come in a set of four; you start with the Red pad together with plain water and this cuts through and removes surface grime and any surface seal. You then progress through one by one until you get to the final Green polishing pad which provides a high polish.

After this I mixed some Tile Doctor Shine crystallising powder with water, the Shine product provides a very high shine and tough durable finish. I used a White |Buffing pad to work the Shine powder into the tiles. After five minutes the residue was removed using a wet vacuum and I used the opposite side of the white pad and some plain water and carried on for another five minutes. Once complete I vacuumed the remaining water off and then with a clean dry white pad buffed up the floor to leave a deep lasting shine.

Recolouring the Grout

The last step was to refresh the grout using a tube of White Grout Colour applied with a toothbrush and then left for a couple of hours before using a white scrubbing pad and a little water spray to remove excess colourant. When I had finished the owner of the house said the floor looked better than it did when it was first laid.

Marble Floor After Polishing and Grout Refresh

 
 

Marble Tile Floor Polish and Grout Refresh in Forestdale, Surrey