Victorian Tiled Floor Covered by Paint Restored to New in Putney

For whatever reason, property owners do sometimes decide to cover up their tiled floors, whether by using something like linoleum or, in some cases, simply painting over the area. Personally I blame that BBC TV series Changing Rooms for some of these disasters and I wouldn’t be surprised if they were to blame for what had occurred at this flat in Putney which believe it or not is an ancient parish that was historically part of Surrey as opposed to London.

The property owners had re-converted the building from two converted flats back into a single dwelling. However, the previous tenants of the bottom flat had decided to paint over the Victorian tiled floor in their section.

Victorian Floor Restoration Putney Before Paint Removal

Naturally the new owners wanted to have this paint covering removed, and for the Victorian tiles to be restored back to looking their best after a long time of being hidden. Here’s how I did it.

Removing Paint from a Victorian Tiled Floor

To remove the layer of paint from the surface of the tiles, I needed to use a solvent remover product specifically designed to remove paints, this was applied liberally to the affected area and left to dwell.

While the solvent remover was working its magic, I set about cleaning the remainder of the tiled area using Tile Doctor Remove & Go. Remove & Go also contains properties designed to break down solvents, as well as adhesives, along with any old sealer remaining on the tiles. This also helped to lift away any trapped dirt.

I then scraped off the top layer coat of paint and was left with a grey undercoat. To lift this out of the tiles and grout I used Remove & Go in combination with a steamer. The heat of the steamer helped to strip away the excess paint, making removal a much easier process.

Victorian Floor Restoration Putney During Paint Removal

Sealing a Victorian Tiled Floor

After leaving the area to dry for a full five days, I returned to the property to reseal the tiles.

My choice of sealer was Tile Doctor Seal & Go, which is a water-based blend of acrylic polymers designed to provide both a stain resistant surface seal and a long-lasting low-sheen finish. It is suitable for use on most kinds of unsealed, porous surfaces, including Slate, Quarry and Sandstone but works really well on Victorian tiled floors.

Victorian Floor Putney After Restoration Victorian Floor Putney After Restoration

The photo below shows the before and after results of the work, with no traces of the paint covering remaining on the tiles. It is a wonder why someone would choose to cover up such a fantastic Victorian patterned floor, but needless to say my client was very happy with what is for all intents and purposes a brand new feature for their property.

Victorian Floor Restoration Putney Before and After Paint Removal

 
 

Professional Tile Restoration of a Victorian Tiled Floor in Surrey

Victorian Tiled Floor in Putney Cleaned and Sealed

Attached are photos from a Victorian tiled hallway floor I completed recently in Putney, South West London. The owner had asked if we could do anything to improve her floor because she has been renovating her house for 2 years since she bought it and had left the floor until last. She didn’t know when it was last cleaned or what products had been used, it’s handy to know a floors history when you’re cleaning it so you know what issues you might face.

Victorian Tiled Floor in Putney Before Cleaning Victorian Tiled Floor in Putney Before Cleaning

Victorian Tiled Floor Cleaning

The first step was to remove any remaining sealer and give it a good clean so I applied a solution of Tile Doctor Remove and Go mixed 50/50 with Nanotech Ultra-Clean to half the floor and left it to dwell while i brought in the rest of my equipment. These two products combine together to create an active cleaning product that can remove coatings; after an hour I then scrubbed it with a rotary machine fitted with a black scrubbing pad and clean water getting on my hand and knees with a scrubbing brush to get into the edges without damaging the skirting board. The last step was to thoroughly rinse the floor and remove any remaining cleaning products which could upset the sealer at a later stage; in fact I rinsed the floor 5 times to be sure. Once this process was complete I repeated it on the other half, I often do hallway floors in two stages so people in the building can still get around without being impacted by the work. I finished off the cleaning using any industrial steamer over the whole floor and plugged in an AirMover to assist with the floor drying before I left for the night.

Sealing Victorian Tiled Hallway

When I returned the next day I checked the floor to make sure I hadn’t missed anything when cleaning and that it was dry enough to apply a Sealer. All was well so I set about applying Tile Doctor Seal and Go which is recommend for Victorian Tiled floors and provides stain resistance along with a durable low-sheen finish. The floor took six coats and as you have to let the floor dry between each coat it took most of the day to complete. Once the last coat was dry I put the AirMover on to help dry it even more and then buffed it with a white buffing pad.

The lady was not there on completion but her mother was and was ecstatic with the result.

Victorian Tiled Floor in Putney After Cleaning and sealing Victorian Tiled Floor in Putney After Cleaning and sealing

 
 

Victorian Tiled hallway floor cleaned and sealed in Putney, South London