Honed Travertine Tiled Floor Cleaned and Sealed in Kensington

I was asked to clean and reseal this Honed Travertine flooring in Kensington, London which ran through the ground floor area and to a small area in the basement. The floor had been laid nine years prior and had only had regular washing by the housekeeper and was now overdue a deep clean and re-seal..

Honed Travertine Kensington Before Cleaning Honed Travertine Kensington Before Cleaning

Deep Cleaning Travertine Tiles

It was a large area so it was necessary to work in sections which had the added complication of having to move the customer’s furniture around.

With each area I scrubbed the floor with a rotary machine fitted with a medium brush head and a hot 3:1 dilution of Tile Doctor Pro-Clean. I scrubbed it in and left it for 10 minutes before scrubbing again then vacuumed it away with a wet vac. I then checked all the grout lines were clean in case the brush head had missed any.

Next I fitted a pad holder to the rotary machine and using a medium grade burnishing pad scrubbed the area again, I then followed this up with the fine grade pad to build a nice sheen on the stone to match the customers’ requirements.

Honed Travertine Kensington After Cleaning

During the cleaning process it became evident that some of the Travertine tiles had holes in them, it’s possible they had been this way when supplied but it’s also possible that they had been worn through by the use of an acidic cleaning solution. so after once the tiles were cleaned and polished I filled in the holes with a matching filler.

Honed Travertine Kensington After Cleaning

Sealing Travertine Floor Tiles

The next step was to seal the Travertine to protect it from future staining and for this I used Tile Doctor Colour Grow which is a colour enhancing impregnating sealer that occupies the pores in the stone. In total I had to use three coats on sealer on the stone due to its porosity. I finally buffed the floor using a white soft buffing pad; this was to take off any seal left sitting on the surface of the stone and helps to work it in.

Honed Travertine Kensington After Sealing

In total it took four days to do this job and the customer was really happy with the result and left a very nice testimonial on the Tile Doctor website.

Honed Travertine Kensington Before and After

 
 

Travertine Floor Cleaned, Polished and Sealed in Kensington

Limestone Tiled Floor Cleaned and Polished in Fulham

This Limestone tiled floor was installed at a property in Fulham, I was asked round to quote for cleaning the floor and whilst I was there I did a patch test. The test worked very well and the owner couldn’t believe that the grout was actually white not dark grey.

Limestone Floor Fulham Grout Cleaning 1

Cleaning Polished Limestone Floor Tiles

The first step was to give the floor a quick sweep to remove any surface grit etc. Before starting the burnishing process which we use on hard stone surfaces such as polished Limestone to clean and bring up the shine on the floor. The burnishing pads and encrusted with diamonds and come in a pack of four consisting of Coarse, Medium, Fine and Very Fine 17” pads. I started with a coarse pad which removes sealers and dirt from the floor, a little water is added to lubricate the process.

Limestone Floor Fulham Before Cleaning Zoom 2 Limestone Floor Fulham Before Cleaning 3

Once we had finished with the coarse pad the grout was cleaned up using Tile Doctor Pro-Clean diluted 1 part cleaner to 4 parts water. The solution was then scrubbed into the grout with a stiff hand brush until it was clean. The floor was then rinsed with clean water to remove any cleaning products and we then continued with the remaining burnishing pads applied in order with Medium, Fine and Very Fine until the floor was thoroughly cleaned and polished. We left for the day at this point to allow the tiles to dry overnight.

Limestone Floor Fulham Before Sealing 4

Sealing Limestone Floor Tiles

The following day we returned to seal the floor using two coats of Tile Doctor Colour Grow which is a great sealer for natural stone such as Limestone as it works to lift the colours out of the stone. The last step was to buff the floor to a nice shine with a rotary machine fitted with a white polishing pad.

Limestone Floor Fulham After Cleaning Sealing 5 Limestone Floor Fulham After Cleaning Sealing 6

The customer was really pleased with the result and couldn’t believe that the floor could look so good.

Limestone Floor Fulham Before and After

 
 

Limestone Floor, Cleaned, Scrubbed, Polished and Sealed in Fulham

Old Encaustic Tiled Floor Restored in Fulham

I had an inquiry from a client in Fulham, who was representing the residents of an old building. The building had recently undergone redecoration and in the hallway, they had removed a thirty year old carpet to discover an original encaustic tiled floor underneath which turned out to be 102 years old.

Old Encaustic Floor Fulham Before Cleaning 1 Old Encaustic Floor Fulham Before Cleaning 2

As you can see from the photographs the floor was extremely dirty and covered in lots of glue and paint from the carpet and decorations. Naturally they were keen to have it restored and brought back to life. Given the condition of the tile and the age I to set their expectations and told them that although I was confident of making a big difference to the floor I couldn’t give any guarantees. I gave them my quotation and although it was slighter higher than what they had I mind, it was still less than other quotations that they had received and were also considering the option of replacing the carpet.

After a couple of days I received a call asking me to go ahead with the work and I booked it in.

Encaustic Tiled Floor Cleaning

My approach to the job was to initially spray a mixture of Tile Doctor Remove and Go combined with Tile Doctor NanoTech UltraClean which creates a powerful tile safe coatings remover with tiny abrasive particles that aid the cleaning process.

I left this to dwell on the tile for about fifteen minutes before scrubbing it in using a black scrubbing pad on my rotary machine. This approach removed some glue and a lot of old grime so I then sprayed down more Remove and Go and also used a steamer to loosen the remaining glue and paint. This process was repeated a section at a time until at the end of the day I gave the whole are a thorough rinse before packing away my equipment and leaving it to dry.

Encaustic Tiled Floor Sealing

I returned three days later and carried out a test with my moisture meter to make sure that the floor was dry enough to seal. The meter confirmed it was dry so I then sealed the floor using two coats of Tile Doctor Colour Grow which is an impregnating sealer that really brings out the colour in the tiles.

Old Encaustic Floor Fulham After Cleaning 3 Old Encaustic Floor Fulham After Cleaning 4

And as you can see the floor is transformed and now I have some happy residents who are really pleased that they opted to have the old floor cleaned instead of replacing the carpet. Not to mention that restoring such an original feature has probably added value to their investment as well.

Old Encaustic Floor Fulham Before and after Restoration 5
 
 

Original Encaustic Tiled floor cleaned and restored in Fulham

300m2 Marble Tiled Floor Cleaned and Polished in Oxshott

Following on from a referral from a Property Management company I paid a visit it to this palatial property in Oxshott which had approximately 300m2 of Marble tiled flooring that they wanted cleaning and re-polishing, my initial quotation to do this mechanically was too high so I offered an alternative using diamond encrusted burnishing pads which reduced the cost significantly. I didn’t receive an answer so I thought that was the end of it however five months later I got an email asking me to carry out the works.

Marble Tiled Floor Oxshott Marble Tiled Floor Oxshott

Marble Tiled Floor Polishing

This was a very large area so we had two men working with burnishing pads in 10 metre sections. The pads come in a set of four; you start with the coarse pad together with a little water and this cuts through and removes surface grime and any surface seal. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish.

Marble Tiled Floor Oxshott Marble Tiled Floor Oxshot

Fortunately there were not many stains and the ones that were there came out quite easily. When we had completed a room using this system we then applied Tile doctor Shine powder which is a crystallising power worked into the floor using a white buffing pad and a little water; it adds an extra level of deep shine to the marble floor giving it that extra wow factor together with a tough durable finish, we did this working 1 m2 at a time.

This whole process took five days to complete and when we had finished the client came to inspect it with the homeowner. She was delighted with the final finish and has said that she will be recommending us to all her friends and clients. This is also great for the property manager because it has given him a good reputation for providing a trustworthy and highly skilled contractor for the works. Also he has promised us further work from his other clients including a job to carry out the external stone cleaning works for the same client.

Marble Tiled Floor Oxshott Marble Tiled Floor Oxshott

 
 

Cleaning and Polishing a Large Marble Tiled floor in Oxshott, Surrey

Applying Anti Slip Treatment to Porcelain tiles in Wimbledon Office

We were contacted by a builder who had recently laid Porcelain Tiles in an office reception in Wimbledon. Although he has laid this type of tile in various art galleries around London without problem, in this particular lobby which is situated next to a shopping centre the tiles were extremely slippery and the facilities manager wanted the tiles changed at the expense of the builder.

Antislip Application Porcelain Tile Wimbledon

Obviously this would have been an expensive option and so the builder contacted Tile Doctor for help. Initially he had considered having a member of his team apply the treatment however he realised that as a Tile Doctor applicator we had been trained to apply the treatment properly and this gave the facilities manager confidence it would have been applied to the correct standard so we were awarded the work and asked to carry it out on a Sunday when the building would be empty.

Antislip Application Porcelain Tile Wimbledon

Applying the Anti-Slip Treatment

We arrived at the agreed time and were let in by the shopping centre security team. The area we were treating was around 25m2 so decided to work in 5m2 sections first cleaning the tile using the first stage Ant Slip product worked into the tile with a rotary floor machine fitted with a polypropylene brush head and then removing with a wet vacuum followed by rinsing with clean water.

We carried on with this process until the whole floor was done and let it dry before going onto the next stage to apply the Tile Doctor Anti slip (stage two) and leaving for between 3 to 5 minutes before applying the stage three which locks in the Anti Slip.

Antislip Porcelain Tile Wimbledon

The Anti Slip product is invisible to the eye however it’s very easy to test it’s been applied, all you need to do is wet the tile as the product only activates when it’s wet.

Antislip Porcelain Tile Wimbledon

When we had finished the whole floor we then tested it again just to make sure that everything worked well we cleared away all the tools making sure we left the area tidy and safe and locked the building up.

The Job took us one night and the customer is now recommending us to all other sites that have had these tiles fitted.
 
 

Preventing slips and trips on Porcelain Tile in a Wimbledon Office

Victorian Tiled Hallway Restoration in Balham

Set of photographs here from a Victorian Tiled floor for a customer in Balham, South London. They had found the floor under an old carpet, and wanted to restore it. Unfortunately their builders did not listen and didn’t bother to put down any protection when they painted, as a result there was paint everywhere, I’ve include a detailed photograph below so you can see for yourself what a state the floor was in.

Victorian Tiled Floor Balham Before Cleaning Victorian Tiled Floor Balham Before Cleaning

Cleaning the Victorian Floor Tiles

Initially the floor was cleaned using a dilution of Tile Doctor Pro-Clean mixed 50:50 with NanoTech UltraClean which had been left to dwell for 20 minutes before being agitated using a rotary machine fitted with a buffing pad. I used a wet vacuum to remove the dirty cleaning solution and then realising something more powerful would be required to shift the stubborn stains and paint marks. To rectify this I applied a Tile Doctor Remove and Go which is a coatings remover and left it to dwell on the Victorian tile for forty minutes before applying plenty of elbow grease. This did the trick to remove the paint and glue etc. so I worked across the floor in sections applying the same treatment until the floor was completely clean.

Once it had all been removed I gave the whole floor a scrub with Tile Doctor Grout Clean-Up and this brightened up the colours and finally I gave the floor a very thorough rinse with clean water to remove any remaining cleaning product that might have an adverse effect on the sealer. I left the floor to dry over the weekend and returned on the following Monday to seal it, but first I carried out a couple of repairs because some of the tiles were loose so I reset them in cement.

Sealing Victorian Tiled Floor tiles

On my return I sealed the floor using two coats of Tile Doctor Colour Grow which is a penetrating sealer that provides maximum stain protection whilst bringing out the colour in the stone.

Victorian Tiled Floor Balham After Cleaning Victorian Tiled Floor Balham After Cleaning

All the customer could say was AMAZING I didn’t think it was possible to get like this.
 
 

Victorian Floor Cleaned and Sealed in Balham, South London

Quarry Tiled Floor Cleaned and Sealed in Ashtead

A while ago I was asked to quote to clean up an old quarry tiled floor in a converted barn in Ashtead. Whilst I was there I carried out a test patch for the lady to show what the results would be; she had said that if she wasn’t satisfied she was going to replace the floor so she must have met her expectations as a week later we were given the go ahead to carry out the work.

Quarry Tile Cleaning Ashtead before

Quarry Tile Cleaning Ashtead before2

Cleaning Hallway Quarry Tiles

Fortunately for us they had recently removed the old kitchen and scheduled us after to clean the quarry tiles before completing the decorating and refitting a new kitchen. We cleaned the tiles using a mixture of Tile Doctor Pro-Clean diluted 1:4 parts with water and Nanotech Ultraclean which adds tiny abrasive particles into the cleaning solution. Normally I would work this into the floor using a black scrubbing pad however the floor was very uneven so I used a medium nylon brush on my rotary machine instead, this had the added advantage of reaching into the grout as well. I should mention we thoroughly rinsed the floor as we went along using a wet vacuum to remove the soiled solution. It took two of us two days to scrub the areas that had to be done and we had a blower running to help dry out the floor.

Sealing Hallway Quarry Tiles

We returned three days later and carried out moisture test to ensure the floors were dry and ready to be sealed. The Quarry tiles were then sealed them with five coats of Tile Doctor Colour Grow which is an impregnating sealer that reaches into the pores of the tile and lifts the natural colours. The owner was extremely happy with the floor and couldn’t wait to have her new kitchen installed to see how it would look.

Quarry Tile Cleaning Ashtead after

Quarry Tile Cleaning Ashtead after2

 
 

Old Quarry Tiles Restored in Ashtead, Surrey

Marble Wall and Floor Tile Refresh in Woking

This job was to refresh the Marble tile installed in a house in Woking. There were a number of different marble tiles installed on the wall and floor including two shower cubicles, a bathroom floor, a small cloakroom floor and the kitchen floor; the pictures below show before and after photographs for each job.

Cleaning a Marble Tile Shower Cubicle

I started with the shower cubicles using Tile Doctor Oxy-Pro which is a specific product for cleaning showers and comes with a spray attachment that mixes the cleaning agent with air making it lighter and helping it stick to vertical surfaces. This was left to dwell on the surface for a while and then the tiles were scrubbed before being rinsed down. This action not only cleaned the dirt and soap scum off the tile it also got rid of some mould that had started to grow.

Marble Shower Cublicle Marble Shower Cubicle

In one shower there was a build-up of limescale on the wall so to get rid of this I used a little Tile Doctor Grout Clean-up, this product is usually for removing grout smears from tile however it’s also good at removing most types of mineral deposits such as Limescale, you do have to be quick though as it’s an Acid based product I had to be quick and to thoroughly rinse because I didn’t want to damage the marble.

Marble Mosaic Bathroom floor tile cleaning

The next job was to tackle the bathroom floor which was tiled with small Marble mosaic tiles. A long time was spent cleaning and scrubbing the grout of this floor using a solution of Tile Doctor Pro-Clean mixed 50/50 with NanoTech Ultra-Clean to add tiny abrasive particles making a very effective tile cleaner. Again once the cleaning was finished cleaning the floor was rinsed thoroughly with clean water to remove any cleaning product.

Marble floor Tiles Before Cleaning Marble floor Tiles After Cleaning

Marble Kitchen floor tile cleaning

The next floor on the list was the kitchen floor, again all Marble tile; on this I used a rotary scrubbing machine fitted with a medium brush head and again a mixture of Pro-Clean and NanoTech UltraClean. The reason I used a brush head instead of a scrubbing pad is because it is a textured marble the brushes will get into the nooks and crannies, the grout was especially stained in this area and this is now much improved.

Marble Kitchen Floor Tile Before Marble Kitchen Floor Tile After

Marble Cloakroom floor cleaning

The last floor on the list to do was the cloakroom WC which was cleaned using the same method as on the bathroom floor described above using the Pro-Clean, NanoTech, and UltraClean mixture worked in with some elbow grease.

Marble Cloakroom- WC Floor

Once everything had been cleaned, and rinsed. I left it all to dry out overnight.

Sealing Marble Tiles

The following day before I sealed I checked everything just in case I had missed anything, but it was all okay. I sealed everything twice using Tile Doctor Colour Grow and checked that the tiles were properly sealed by doing a water test. When sealing you have to make sure that you don’t let the seal puddle so I buff the tiles with terry towelling and on the large areas I also buff the floors with a white buffing pad.

As you can imagine this was a very large job and when everything was eventually finished the lady said she was really happy and couldn’t believe how the tiles had come out, she even had her neighbours round to see how it all turned out and they were all suitably impressed.
 
 

Multiple Marble Tile Wall and Floor Tiles cleaned in Woking, Surrey

Resolving Sandstone Flagstone issues in Clapham

Details below of a Sandstone floor installed in the Kitchen of a house in Clapham, South London. The client had not been happy with the floor since it had been installed because the tiler hadn’t applied the seal correctly. The owner had also had a quote from a stonemason who had recommended grinding off the top later of stone. I explained that that would not be necessary and went on to explain the process to restore it. As it turns out my quote was £500 cheaper that the Stone mason but I was confident I could get as good a result and the customer could see I knew what I was talking about and gave the job to me.

Sandstone Tiles Before Cleaning Sandstone Tiles Before Cleaning

Sandstone Tile Cleaning

I began work on the floor using a coarse diamond burnishing pad fitted to a rotary scrubbing machine with a little water. I slowly scrubbed the floor in small areas and removed the old sealer from the whole tile. The next step was to tackle the grout which was done by applying Tile Doctor Pro-Clean worked in along the grout lines using a stiff grout cleaning brush. After this the pad was replaced on the rotary machine with a medium brush head and the floor was given a good scrub followed by rinsing thoroughly with fresh water.

At this stage it was evident that a couple of stubborn areas were still in need of attention due to the old sealer still being present so Tile Doctor Remove and Go was applied which is a strong sealer stripper and left to dwell for around 40 minutes before being scrubbed in and washed down again.

I can recommend a Wet Vacuum at this point as they are great at removing liquids from floors; at this point I left for the day to allow the floor to dry overnight ready for sealing the next day.

Sandstone Tile Sealing

Then next day when I returned I checked to make sure the floor was dry and ready to seal, there were a couple of little patches I needed to redo and once they were rinsed I dried them using my heat gun. I then sealed the floor with four coats of Tile Doctor Colour Grow and when the last coat had dried I demonstrated to the customer that it was fully sealed using a water test.

Sandstone Tiles After Cleaning Sandstone Tiles After Cleaning

The client was really pleased with the results and that I had saved him so much money and left the following comment on our feedback system.

Bill was great and worked hard to restore and protect the floor. We’re very pleased. There has been some accidental damage outside which I’m happy we’ll sort.
Ian Blandford, Clapham

Sandstone Tiles Before and After

 
 

Sandstone Tiled Floor Cleaned and Sealed in South London

Travertine Tiled Kitchen floor in Mitcham

I was recently asked to visit a customer with a Travertine Tiled Kitchen floor in Mitcham South London who had spilt a strong cleaning product on the Travertine Tiles. Due to the litigious nature of the wold in which we live I can’t name the product in this post but I can tell you it’s advertised on the TV as a wonder cleaner, unfortunately acidic products like this one will eat into the sealer and with frequent use cause holes to appear in natural stone. Fearing that he had ruined them I checked the floor over and assured him I could make his tiles look as good as new.

Travertine Mitcham Before Travertine Mitcham Before

Cleaning Travertine Tile

I used the diamond encrusted burnishing pad system starting with the red pad and water to clean the tiles and remove any topical sealers that may have been present. This was continued with the white and yellow pads using nothing but water and then with a stiff grout cleaning brush and a weak solution of Tile Doctor Pro-Clean along the grout lines to make sure all the grout was thoroughly cleaned. Last step of the cleaning process was to rinse the floor of any dirt picked up by the pads and then when the floor was dry I used a green polishing pad to add a shine to the floor.

Sealing Travertine Tile

To protect the travertine it was sealed using a single coats of Tile Doctor Colour Grow which is an impregnating sealer which brings out the natural colour in stone. Once it was all dry again I buffed it up again but used a soft white buffing pad. As you can see by the photos the tiles look great and I have one very grateful customer who said they look better than when they were first laid.

Travertine Mitcham After Travertine Mitcham After

 
 

Travertine Tiled Kitchen floor in Mitcham

Cleaning Encaustic Kitchen Floor Tiles in Beckenham

On a visit to a customer to a customer in Beckenham, Kent who had a pair of rugs that needed cleaning I was asked to take a look at her Encaustic kitchen floor tiles which had become dull and she couldn’t keep them clean. I carried out a demonstration on how I would clean them and also explained the different sealer options available and how each sealer can have a different effect. She was pleased with the demonstration and engaged me to clean the tiles as well as the rugs specifying a sealer that would leave a sheen on the tile.

Encaustic Floor Tiles Before Cleaning

Cleaning black Porcelain floor tiles

I set about scrubbing the floor using a hot water dilution of Tile Doctor Pro-Clean Tile and Grout cleaner combined 50:50 with NanoTech UltraClean which adds tiny abrasive particles to the solution to make a more effective cleaning product. The solution was worked into the tiles by scrubbing with a rotary machine fitted with a black scrubbing pad and a stiff hand brush was used along the tight grout lines. The soiled solution was removed using a wet vacuum and floor thoroughly rinsed down with clean water. The tiles were then left to dry with the aid of a Turbo Air blower to help speed up the drying time.

Encaustic Floor Tiles Before Cleaning Encaustic Floor Tiles Before Cleaning

Sealing Encaustic Floor Tiles

Once the tiles were dry I applied five coats of Tile Doctor Seal and Go which is a water based protective sealer that doesn’t give off any odour and produces a nice low sheen the customer was looking for.

Encaustic Floor Tiles After Cleaning

The final result was one happy customer with a clean easy to maintain tiled floor and two clean rugs as well.
 
 

Cleaning Encaustic floor Tiles in a Beckenham Kitchen

Travertine Tiled floor in Gerrards Cross

I had a phone call a few weeks ago from a lady in Gerrards Cross to come and clean her large Travertine tiled floors prior to her renting out a property. I had actually carried out this job for her four years ago and she was really pleased with the service we provided and had therefore asked me come back. Thinking back four years is a long time between floor polishes so we certainly did a good job on the floor the first time.

Travertine Floor Before Travertine Floor Before

Maintaining Travertine Tiles

Travertine is a very hard stone which required the surface to be cut back before polishing, to do this we make use of a diamond encrusted burnishing pad system which is supplied in a set of four pads each one having a different purpose. We started with a Red pad first together with a little water and this strips dirt and old sealers from the floor, this is followed with the White, Yellow and finally Green pad which doesn’t required the use of any water. As you progress through the pads you find the polish is restored and you get a deep shine in the surface of the tile.

Travertine Floor Mid-Clean Travertine Floor Mid-Clean

Sealing Travertine Tile

To protect the floor from stains it was sealed with a single coat of Tile Doctor Colour Grow which is a colour enhancing sealer that brings out the colours in natural stone. Once the sealer was dry it was buffed using a white buffing pad to make sure that I hadn’t left any residues from the seal.

Once again the lady was really pleased with our work and promised to call the next time the property was to be let out again, but next time she wants me to do the carpets and the patio areas as well.

Travertine Floor After Travertine Floor After

 
 

Travertine tiled floor maintained in Gerrards Cross

Quarry Tiled Hallway Floor Cleaned and Sealed in Brixton

These photographs are from a Quarry Tile Cleaning job we did for a lady in Brixton recently, as you can see from the early pictures they were not only dirty but there was also evidence of an old sealer and splashes of paint on them as well both of which would have to be removed first.

Quarry Tile Kitchen Floor Before Quarry Tile Kitchen Floor Before

Cleaning Hallway Quarry Tiles

The first task we did on arrival was to disconnect her cooker and washing machine which were placed outside in the garden, this would allow us to get at all the tiled areas and also meant there was less to protect.

Working in small sections the next step was to pre-wet the floor tiles followed by adding a dilution of Tile Doctor Remove and Go combined 50/50 with Nanotech UltraClean, these two products combine to make a powerful cleaner/stripper that’s safe to use on tile. The cleaning solution was left to soak into the tile whilst we set up all of our equipment and added protective coverings to the kitchen units, walls and adjoining floors.

After about forty five minutes we re-wet the areas and hand scrubbed the tiles using scouring pads. This process was repeated covering small areas at a time until the kitchen was finished. We then used our scrubbing machine with a medium brush head fitted and thoroughly rinsed the floor to remove any trace of chemical.

We needed the floor dry for sealing so a couple of Turbo blowers we setup to force dry the floor and this took a couple of hours before my moisture meter told me that the floor was dry enough.

Sealing Hallway Quarry Tiles

After discussing sealer choices with the customer it was decided to seal the floor with Tile Doctor Colour Grow which provides a natural finish whilst lifting the natural colours in the tile. Two coats were sufficient and once it had dried we refitted the cooker and washing machine, put all the plinths back and removed all of our protective coverings.

Quarry Tile Kitchen Floor After Quarry Tile Kitchen Floor After

The lady was really pleased with our work and left the following testimonial.

“Bill did a fantastic job on my kitchen floor, I can’t thank him enough. Mrs Scott, Brixton”

Quarry Tile Kitchen Floor Before and After

 
 

Quarry Tile Renovation in Brixton

Terracotta Tiled Floor Sealing

Although officially the East Surrey Tile Doctor we often get requests further afield through customer recommendations, this particular Terracotta Tiled floor was in Brixton, South London. You can see from the photographs below that the floor was not looking its best and had been splashed with paint.

Terracotta Tile Cleaning

To get the tiles clean we applied a strong dilution of Tile Doctor Pro-Clean mixed 50/50 with NanoTech Ultra Clean which combines well to produce a heavy duty alkaline cleaner/coatings stripper with a cleaner containing tiny nano sized abrasive particles that work deep into the floor. This combination is ideal for dealing difficult floors, its best to let it dwell on the floor for 10 to 20 minutes before working it into the tiles with a rotary machine fitted with a black scrubbing pad.

Terracotta Restoration Before Photo

Once that was done the soiled solution was removed from the floor using a wet vacuum and we were then able to see a few spots where old wax remained on the floor. To deal with the wax Tile Doctor Remove and Go, which is a powerful coatings remover, was applied to the floor and left to dwell for a while before rinsing thoroughly with clean water and then treated with a steam cleaning machine to ensure the floor had been neutralised of all chemicals. It’s important not to leave a trace of chemical on the floor as they could react with the sealer.

The floor was still quite wet at this stage with small puddles of water forming in the dips of the uneven floor; the wet vacuum took care of most of this but the floor was still too damp for sealing so I left a couple of air blowers to assist with the drying of the floor and returned two days later to start the sealing.

Terracotta Restoration Before Photo

Terracotta Tile Sealing

When we returned the floor was mainly dry but there were a couple of damp spots which I took care of with a heat gun. Tile Doctor Seal and Go was used to seal the floor; Terracotta can be very porous so eight coats were required to completely seal the floor so it was some time before it was finished.

Terracotta Restoration After Photo Terracotta Restoration After Photo

When I finished I gave the customer instructions on how to maintain the floor. He was over the moon with the result and said that it had far exceeded his expectations.

Another happy customer.

Terracotta Restoration Before and After

 
 

Terracotta Floor Cleaned and Sealed in Brixton

Victorian Tiled Hallway Cleaning in Richmond

This hallway floor was at a property in the London borough of Richmond which had just been sold and the new owner wanted the Victorian tiled floor cleaning before she moved in.

Victorian Floor Cleaning Before

Cleaning a Victorian Floor

To clean the floor I applied a 50/50 mix of Tile Doctor Pro-Clean and NanoTech Ultra Clean diluted with water. Pro-Clean is a strong alkaline cleaner so it won’t damage the tile like some acidic cleaners and NanoTech Ultra Clean adds tiny abrasive particles to the solution that can help penetrate into the tile to lift out the dirt. This was left to dwell and soak into the floor for a while before being agitated using a rotary machine fitted with a black scrubbing pad. This worked to clean the floor and strip any remaining sealer from the tile; the soiled solution was removed from the floor using a wet vacuum and then thoroughly rinsed to remove any cleaning products before sealing and neutralise the floor.

Victorian Floor Cleaning During

Sealing a Victorian Floor Sealing

The floor was dried using an floor blower, which is a like an industrial hair dryer, before being sealed with five coats of Tile Doctor Seal and Go which is an ideal sealer for Victorian tiled floors as it leaves a low sheen finish whilst providing excellent stain protection. You have to wait for each coat to dry before moving on to the next so it was a long day, fortunately the house was empty which made the job easier.

Victorian Floor After Cleaning

 
 

Victorian Tiled hallway floor cleaned and sealed in Richmond