Victorian Tile Cleaning

Welcome to my Work History archive where you will find detailed examples of the cleaning and renovation of Victorian tiles carried out in East Surrey

Cleaning and Renovating Victorian Tiles

Commonly found in the hallways of oldder UK properties Victorian tiles are very hard wearing and can provide a classic look to any space. We often find that the beauty of these tiles are hidden under years of grime and neglect and are often covered up with carpets etc as tastes have changed over the years. If this sounds familiar then all is not lost as they can be restored.

The standard bearer for quality Victorian tiles was a firm called Minton Hollins, an English manufacturer who made a very good product which lasted the test of time. Victorian building practices however did not include the use of damp proof membranes and we often find damp can be a major issue with these old floors leading to salt problems known as efflorescence.

Common problems we face when restoring Victorian tiles are the removal of carpet glue, paint splashes and cement. Loose and cracked tiles can also be a problem however due to their popularity we usually find finding replacement tiles isn’t a problem.

Below you will find detailed examples of work we have carried out in the past, it should give you some idea of what’s involved and what can be achieved with the right techniques and products.


Victorian Hallway Floor Restoration Reigate

Victorian Tiled Hallway Deep Cleaned and Sealed in Reigate

It had been a while since this Victorian tiled hallway at a property in Reigate had received a deep clean and re-seal and it was now looking quite unloved. The sealer had almost worn off and dirt had become ingrained in the pores of the tile leaving it dull and lifeless. Hallways floors receive a lot of foot traffic so do need regular attention if they are to look their best and this example was no different.

Fortunately, the floor was intact with no broken or loose tiles to deal with, there were a few chipped tiles in the floor but I think that adds character to a floor of this age. I worked out a quote to deep clean the tiles, flush out the dirt and add a fresh sealer to protect them. The quote was accepted and a date set for the work to commence.

Victorian Tiled Hallway Floor Before Restoration Reigate

Deep Cleaning a Victorian Tiled Hallway Floor

I started the work by applying a generous coating of Tile Doctor Oxy-Gel and left it to soak into the pores of the Victorian tiling for around 30 minutes. I used Oxy-Gel so as to minimise the use of water which can exacerbate efflorescence salt issues which is a typical problem of floors of this age that don’t have the benefit of a damp proof membrane.

Then using a very coarse 100-grit diamond encrusted pad attached to a rotary floor machine the tiles were given a good scrub. This process skims away a small layer off the surface of the tiles to remove the dirt and old coatings such as sealers. All the soil was extracted from the floor using a wet vacuum and I repeated this process twice for maximum effect.

At this point the tiles were already looking significantly better but I hadn’t finished yet. I still needed to deal with the edges and corners where the pad can struggle to reach. For this I use handheld burnishing blocks and more Oxy-Gel, you need a lot of elbow grease to do this but its an important step and can also be used to deal with any stubborn areas.

Once finished I used a little water to help rinse off the floor and the wet vacuum again to get the floor as dry as possible before leaving the floor to dry off completely overnight.

Sealing a Victorian Tiled Floor

The tiles need to be dry before sealing so the next day my first action was to test the floor for moisture using a damp meter. They passed and were ready to take a sealer which for this floor I used Tile Doctor seal and Go Extra. It’s super tough and ideal for doorways and hallways and leaves a nice sheen without being too shiny.

Victorian Tiled Hallway Floor After Restoration Reigate

Before leaving I left advice on how to maintain the tiles using Tile Doctor Neutral Tile Cleaner which is a gentle tile cleaning product that will clean the floor without impacting the sealer which can be a problem with many of the strong products you find in supermarkets.

 

Professional Cleaning and Sealing of a Victorian Tiled Hallway in East Surrey

Victorian Tiled Hallway Deep Cleaned and Sealed in Reigate Read More »

Victorian Hallway Before and After Restoration Brixton

Old Victorian Tiled Hallway Fully Restored in Brixton

I was asked to look at an old Victorian Tiled Hallway floor at a house in Brixton, South London. This classic floor had been discovered underneath an old hallway carpet while refurbishment works were being carried out. I went over initially in mid December to survey the floor and talked the owner through a number of similar restorations we had completed in the past. I could see this floor would need a deep clean to remove the years of dirt and also some tiling would needed to be done to tile a section of concrete near the stairs that had been dug out to lay pipe work when central heating had been installed many years prior. She didn’t want to make a commitment at that point so I left her with our quotation so she could think it over. I suspect she had other quotes to review however I’m pleased to say that she decided to give the work to us.

Victorian Tiled Hallway Before Restoration Brixton Victorian Tiled Hallway Before Restoration Brixton

Once we had agreed a date to do the work I started looking around for replacement tiles that would be needed to restore the floor. Unfortunately the octagonal ones are not made anymore and I couldn’t hold of any salvaged ones either. Having been involved in Tile Restoration work for some time now, I have a list of companies and reclamation yards that are usually a good source for these materials. To resolve the problem I sourced square tiles with a similar look and would cut them to the same shape when on site.

Victorian Tiled Hallway Before Restoration Brixton

Cleaning and Repairing a Heavily Soiled Victorian Tiled Floor

I returned after Christmas to start the restoration process which was due to take two to three days. To start the restoration process we applied a strong dilution of Tile Doctor Remove and Go to the floor, allowed it to soak in for ten minutes and then worked it into the tiles using a scrubbing pad fitted to a rotary machine. Remove and Go is a product that removes coatings from tiles including in this case old paint splashes and carpet adhesive. The floor was then rinsed and the now dirty solution extracted using a wet vacuum.

Victorian Tiled Hallway During Restoration
Once this was finished the floor was looking cleaner and the next step was to tackle the concrete area near the stairs where the heating pipes had been buried. The cement had to be carefully chipped away and then refilled with fresh cement but to the level of the original surface so we could lay new tile on top. We use a quick setting compound for this and were able to start relaying and grouting the section with new specially cut tiles later that afternoon.

Victorian Tiled Hallway During Restoration Brixton Victorian Tiled Hallway During Restoration Brixton

Naturally the strip of new tiles were quite noticeable against the old and although the customer was happy I knew I could get a better result by running a very coarse burnishing pad fitted to a heavy buffing machine over the surface. I used a diamond resin hybrid 50 grit pad to take off the top layer of the tiles and then refinished the surface with a 100 and then 200 grit pad. This did the trick and it was impossible to tell the old and new apart.

After this I carried out an acid wash using Tile Doctor Grout Clean-up diluted with four parts water. The purpose of this was to remove any old grout smears and mineral deposits from the floor as well as counteract any possibility of unsightly efflorescence salts rising up through the tile at a later stage. This is quite a common problem with these old floors which don’t have a damp proof coarse and certainly I could see no trace of a DPC when I dug out the cement around the pipe work earlier.

The last step in the cleaning process was to steam the entire floor and then leave it to dry off fully over the New Year break.

Sealing a Victorian Tiled Floor

I returned on the 2nd of January and after inspecting the floor to ensure it was clean and free of damp I began to seal it using Tile Doctor Colour Grow which is an impregnating sealer that soaks into the pores of the tile protecting it from within and enhancing its appearance in the process. Four coats of sealer were needed and as you can see by the final pictures the final results were outstanding.

Victorian Tiled Hallway After Restoration Brixton
Period features such as old Victorian floors add a lot of value to and the customer was over the moon with the transformation and is so happy she chose to have the floor restored rather than covering it back up with carpet.

Victorian Tiled Hallway After Restoration Brixton
 

Professional Victorian Tiled Hallway Restoration in South London

Old Victorian Tiled Hallway Fully Restored in Brixton Read More »

Victorian Tiled Hallway Before and After Restoration Fulham

Heavily Soiled Victorian Tiled Hallway Restored in Fulham

This Victorian tiled floor at a house in Fulham was in an absolutely horrendous state. As you can see from the first photograph, the tiles were caked in layer upon layer of muck, including paint and glue stains. This was due to the floor being unknowingly hidden for many, many years under carpet.

Victorian Tiled Hallway Before Restoration Fulham
Needless to say, the property owner was desperate to remedy get the fantastic pattern floor back into good nick, and so contacted me for assistance. I travelled up to the property in the town of Fulham in South West London, which is famous for its football club, to survey the situation and begin the work. It was immediately clear that the thick layers of dirt and staining would need to be removed, before being treated to a new seal to provide long-lasting protection.

Victorian Tiled Hallway Before Restoration Fulham

Cleaning a Heavily Soiled Victorian Tiled a Floor

My product of choice for removing the extremely heavy soil buildup on the tiles was Tile Doctor NanoTech HBU (formerly UltraClean), a powerful solvent-based cream cleaner. What makes this product different from standard cleaners is its use of nano-sized cleaning particles to penetrate below tough stains, dissolve them, and lift them to the surface. NanoTech HBU is a highly versatile product which can be used on most types of natural stone floor, both polished and unpolished.

I laid down the NanoTech HBU and left it to dwell for a short period on the tiles, allowing it to begin eating through the dirt, before using a scraper in combination with a steamer to manually lift the muck away from the tiles. Next, to tackle the glue and paint marks, I applied Tile Doctor Remove and Go, a stripper specifically designed to break down adhesive and solvent stains, and then used a scraper and a scouring pad to manually remove the glue and paint in the affected areas.

Once this was done, I scrubbed in some more NanoTech HBU to dissolve any remaining muck before rinsing the area thoroughly with clean water. To complete the cleaning process, I laid some down some Tile Doctor Acid Gel, which is a blend of Phosphoric and Hydrochloric acids in gel form, to eliminate inherent grout haze and alkaline mineral deposits in the affected areas. I then left this to dwell for ten minutes before giving the floor a final rinse to remove any chemicals and soiled residue. The floor was left for a week to dry out before I returned to seal it.

Sealing a Victorian Tiled Floor

With these fantastic Victorian tiles now muck-free, I proceeded to seal the floor. I initially applied a single coat of Tile Doctor Colour Grow, which is an impregnating, colour-enhancing sealer that really brings out the colourful features of patterned Victorian tiled floors like this one.

Victorian Tiled Hallway After Restoration Fulham
Once this initial coat of sealant had dried in, I asked the customer which kind of finish she preferred for the floor. She decided on a sheen finish, and so I laid down an extra five layers of Colour Grow to ensure the desired appearance, as well as to guarantee durable surface protection against dirt, stains and spillages.

Victorian Tiled Hallway After Restoration Fulham
The customer was really pleased with the results of the restoration, and left the following feedback:

“Bill worked extremely hard to clean and seal our hall tiles. Everyone is amazed at how good they look. We are extremely pleased with the results.”

Victorian Tiled Hallway Before and After Restoration Fulham
Another great Victorian tiled floor brought back to life, and and satisfied customer!

Professional Victorian Tiled Hallway Restoration in South London

Heavily Soiled Victorian Tiled Hallway Restored in Fulham Read More »

Victorian Floor Restoration Putney Before and After Paint Removal

Victorian Tiled Floor Covered by Paint Restored to New in Putney

For whatever reason, property owners do sometimes decide to cover up their tiled floors, whether by using something like linoleum or, in some cases, simply painting over the area. Personally I blame that BBC TV series Changing Rooms for some of these disasters and I wouldn’t be surprised if they were to blame for what had occurred at this flat in Putney which believe it or not is an ancient parish that was historically part of Surrey as opposed to London.

The property owners had re-converted the building from two converted flats back into a single dwelling. However, the previous tenants of the bottom flat had decided to paint over the Victorian tiled floor in their section.

Victorian Floor Restoration Putney Before Paint Removal
Naturally the new owners wanted to have this paint covering removed, and for the Victorian tiles to be restored back to looking their best after a long time of being hidden. Here’s how I did it.

Removing Paint from a Victorian Tiled Floor

To remove the layer of paint from the surface of the tiles, I needed to use a solvent remover product specifically designed to remove paints, this was applied liberally to the affected area and left to dwell.

While the solvent remover was working its magic, I set about cleaning the remainder of the tiled area using Tile Doctor Remove & Go. Remove & Go also contains properties designed to break down solvents, as well as adhesives, along with any old sealer remaining on the tiles. This also helped to lift away any trapped dirt.

I then scraped off the top layer coat of paint and was left with a grey undercoat. To lift this out of the tiles and grout I used Remove & Go in combination with a steamer. The heat of the steamer helped to strip away the excess paint, making removal a much easier process.

Victorian Floor Restoration Putney During Paint Removal

Sealing a Victorian Tiled Floor

After leaving the area to dry for a full five days, I returned to the property to reseal the tiles.

My choice of sealer was Tile Doctor Seal & Go, which is a water-based blend of acrylic polymers designed to provide both a stain resistant surface seal and a long-lasting low-sheen finish. It is suitable for use on most kinds of unsealed, porous surfaces, including Slate, Quarry and Sandstone but works really well on Victorian tiled floors.

Victorian Floor Putney After Restoration Victorian Floor Putney After Restoration

The photo below shows the before and after results of the work, with no traces of the paint covering remaining on the tiles. It is a wonder why someone would choose to cover up such a fantastic Victorian patterned floor, but needless to say my client was very happy with what is for all intents and purposes a brand new feature for their property.

Victorian Floor Restoration Putney Before and After Paint Removal
 

Professional Tile Restoration of a Victorian Tiled Floor in Surrey

Victorian Tiled Floor Covered by Paint Restored to New in Putney Read More »

Victorian Tiled Floor Balham Before and After

Restoring a Victorian Tiled floor hidden under Carpet in Balham

This post is from a house in Balham where the owner was doing some renovation work and after deciding to change the flooring in the hallway they discovered an original Victorian tiled floor. They planned to restore the floor unfortunately however their builders did not listen and didn’t bother to put down any protection when decorating leaving it in a worse condition than when they found it.

Victorian Tiled Floor Balham Before Cleaning Victorian Tiled Floor Balham Before Cleaning

Cleaning the Victorian Tiled Floor

To initially clean the floor I put down a 50/50 mixture of Tile Doctor Pro-Clean and Nanotech Ultraclean diluted with four parts water; this creates a powerful alkaline cleaner that is safe to use on tiles and contains tiny abrasive particles to cut through the grime. This solution was left to dwell on the tile for twenty minutes before being agitated using a rotary machine fitted with a black scrubbing pad. This action did well to deep clean the tiles and remove dirt but there was still plenty of other problems to deal with including paint from the decorating and glue from the carpet.

To remove the glue and paint I treated the surface with Tile Doctor Remove and Go which as its name suggest is designed to remove coatings from the surface of tiles without damaging them. Working in sections the product was left to dwell for forty minutes on the surface of the tile before being worked in by hand into the glue and paint. Once it had all been removed I gave the whole floor a scrub with Grout Clean-Up to remove grout from the surface of the tile and this brightened up the colours. Last step was to give the floor a thorough rinse down using clean water, this is quite important and you need to ensure any trace of product has been removed before sealing. The water was removed using a wet vacuum which literally sucks the water off the floor and reduces drying times, the floor was still fairly damp at this stage so we called it a day leaving an air blower in place to help the floor to dry overnight.

Sealing Victorian Tiles

When I came back the next day I decided to seal the tiles using Tile Doctor Colour Grow which is an impregnating sealer that penetrates into the pores of the tile blocking any dirt from getting in and making the tiles easier to clean.

Victorian Tiled Floor Balham After Cleaning Victorian Tiled Floor Balham After Cleaning

Two coats were sufficient and Colour Grow also brings out the colour in the tile improving its look, certainly my customer thought so as all they could say was:

“AMAZING I didn’t think it was possible to get like this.”

Victorian Tiled Floor Balham Before and After
 

Victorian Floor Restoration in Balham

Restoring a Victorian Tiled floor hidden under Carpet in Balham Read More »

Victorian Tiled Floor Balham After Cleaning

Victorian Tiled Hallway Restoration in Balham

Set of photographs here from a Victorian Tiled floor for a customer in Balham, South London. They had found the floor under an old carpet, and wanted to restore it. Unfortunately their builders did not listen and didn’t bother to put down any protection when they painted, as a result there was paint everywhere, I’ve include a detailed photograph below so you can see for yourself what a state the floor was in.

Victorian Tiled Floor Balham Before Cleaning Victorian Tiled Floor Balham Before Cleaning

Cleaning the Victorian Floor Tiles

Initially the floor was cleaned using a dilution of Tile Doctor Pro-Clean mixed 50:50 with NanoTech UltraClean which had been left to dwell for 20 minutes before being agitated using a rotary machine fitted with a buffing pad. I used a wet vacuum to remove the dirty cleaning solution and then realising something more powerful would be required to shift the stubborn stains and paint marks. To rectify this I applied a Tile Doctor Remove and Go which is a coatings remover and left it to dwell on the Victorian tile for forty minutes before applying plenty of elbow grease. This did the trick to remove the paint and glue etc. so I worked across the floor in sections applying the same treatment until the floor was completely clean.

Once it had all been removed I gave the whole floor a scrub with Tile Doctor Grout Clean-Up and this brightened up the colours and finally I gave the floor a very thorough rinse with clean water to remove any remaining cleaning product that might have an adverse effect on the sealer. I left the floor to dry over the weekend and returned on the following Monday to seal it, but first I carried out a couple of repairs because some of the tiles were loose so I reset them in cement.

Sealing Victorian Tiled Floor tiles

On my return I sealed the floor using two coats of Tile Doctor Colour Grow which is a penetrating sealer that provides maximum stain protection whilst bringing out the colour in the stone.

Victorian Tiled Floor Balham After Cleaning Victorian Tiled Floor Balham After Cleaning

All the customer could say was AMAZING I didn’t think it was possible to get like this.

Victorian Floor Cleaned and Sealed in Balham, South London

Victorian Tiled Hallway Restoration in Balham Read More »

Victorian Floor After Cleaning

Victorian Tiled Hallway Cleaning in Richmond

This hallway floor was at a property in the London borough of Richmond which had just been sold and the new owner wanted the Victorian tiled floor cleaning before she moved in.

Victorian Floor Cleaning Before

Cleaning a Victorian Floor

To clean the floor I applied a 50/50 mix of Tile Doctor Pro-Clean and NanoTech Ultra Clean diluted with water. Pro-Clean is a strong alkaline cleaner so it won’t damage the tile like some acidic cleaners and NanoTech Ultra Clean adds tiny abrasive particles to the solution that can help penetrate into the tile to lift out the dirt. This was left to dwell and soak into the floor for a while before being agitated using a rotary machine fitted with a black scrubbing pad. This worked to clean the floor and strip any remaining sealer from the tile; the soiled solution was removed from the floor using a wet vacuum and then thoroughly rinsed to remove any cleaning products before sealing and neutralise the floor.

Victorian Floor Cleaning During

Sealing a Victorian Floor Sealing

The floor was dried using an floor blower, which is a like an industrial hair dryer, before being sealed with five coats of Tile Doctor Seal and Go which is an ideal sealer for Victorian tiled floors as it leaves a low sheen finish whilst providing excellent stain protection. You have to wait for each coat to dry before moving on to the next so it was a long day, fortunately the house was empty which made the job easier.

Victorian Floor After Cleaning
 

Victorian Tiled hallway floor cleaned and sealed in Richmond

Victorian Tiled Hallway Cleaning in Richmond Read More »

Victorian Tiled Floor in Putney Cleaned and Sealed

Attached are photos from a Victorian tiled hallway floor I completed recently in Putney, South West London. The owner had asked if we could do anything to improve her floor because she has been renovating her house for 2 years since she bought it and had left the floor until last. She didn’t know when it was last cleaned or what products had been used, it’s handy to know a floors history when you’re cleaning it so you know what issues you might face.

Victorian Tiled Floor in Putney Before Cleaning Victorian Tiled Floor in Putney Before Cleaning

Victorian Tiled Floor Cleaning

The first step was to remove any remaining sealer and give it a good clean so I applied a solution of Tile Doctor Remove and Go mixed 50/50 with Nanotech Ultra-Clean to half the floor and left it to dwell while i brought in the rest of my equipment. These two products combine together to create an active cleaning product that can remove coatings; after an hour I then scrubbed it with a rotary machine fitted with a black scrubbing pad and clean water getting on my hand and knees with a scrubbing brush to get into the edges without damaging the skirting board. The last step was to thoroughly rinse the floor and remove any remaining cleaning products which could upset the sealer at a later stage; in fact I rinsed the floor 5 times to be sure. Once this process was complete I repeated it on the other half, I often do hallway floors in two stages so people in the building can still get around without being impacted by the work. I finished off the cleaning using any industrial steamer over the whole floor and plugged in an AirMover to assist with the floor drying before I left for the night.

Sealing Victorian Tiled Hallway

When I returned the next day I checked the floor to make sure I hadn’t missed anything when cleaning and that it was dry enough to apply a Sealer. All was well so I set about applying Tile Doctor Seal and Go which is recommend for Victorian Tiled floors and provides stain resistance along with a durable low-sheen finish. The floor took six coats and as you have to let the floor dry between each coat it took most of the day to complete. Once the last coat was dry I put the AirMover on to help dry it even more and then buffed it with a white buffing pad.

The lady was not there on completion but her mother was and was ecstatic with the result.

Victorian Tiled Floor in Putney After Cleaning and sealing Victorian Tiled Floor in Putney After Cleaning and sealing

 
 

Victorian Tiled hallway floor cleaned and sealed in Putney, South London

Victorian Tiled Floor in Putney Cleaned and Sealed Read More »

Fulham Victorian Floor After

Victorian Tiled Floor Restoration in Fulham

Details below of a Victorian tiled floor that we cleaned and sealed for a gentleman in Fulham South West London after he had refurbished his house and the workmen had left it worse for wear.

Victorian Floor Cleaning

I used a strong solution of Tile Doctor Pro-Clean diluted with hot water and applied to the floor and agitated using a rotary machine fitted with a black scrubbing pad. This worked to clean the floor and strip the existing sealer from the whole area, I then got on my hands and knees to scrub the edges and to check that all paint and glue had been removed. The soiled solution was removed using a wet vacuum and then rinsed three times before using an industrial steamer over the whole floor. This helps to neutralise and remove any products which could upset a sealer.

Fulham Victorian Floor Before Fulham Victorian Floor Before

Victorian Floor Sealing

I then left the floor to dry out and came back two days later to seal it. On my return I checked that all the chemicals had been removed and that there was no paint and muck left on the floor.

Once I was happy I then laid 6 coats of Tile Doctor Seal and Go which is an ideal sealer for Victorian tiled floors as it provides stain resistance with a low sheen finish. An industrial air mover was used to reduce drying times between coats. The last step was to buff the floor using a white buffing pad to harden the seal. The gentleman was really happy with the result and was pleased that the new tiles that had been laid as part of the renovation now blended in perfectly with the old tiles.

Fulham Victorian Floor After Fulham Victorian Floor After

 

Victorian Tiled floor cleaned and sealed in Fulham

Victorian Tiled Floor Restoration in Fulham Read More »

Victorian Tiled Floor After Restoration

Victorian Tiled floor restoration in Lewisham

I’m not sure if Tile Doctor is the reason for this but there seems to have been a marked increase in the restoring of floors that have been found hidden under carpet; this particular floor was Victorian Tiles and the lady who owned the house had discovered it after lifting the carpet that had been down for 15 years and wanted to make a feature of it. The carpet had done a reasonable job of protecting it but it was dull and there were what appeared to be white paint spots on the surface.

Victorian Tiled Floor Before Restoration Victorian Tiled Floor Before Restoration

Cleaning a Victorian Tiled Floor

I started the cleaning process using a solution of Tile Doctor Nanotech Ultra-Clean which is an abrasive tile and stone cleaner mixed 50/50 with Tile Doctor Remove and Go which is a multi-purpose tile friendly stripper that can remove sealers and other coatings. The working space was quite tight so this was applied to half of the floor and left to soak in for an hour whilst I setup equipment. After an hour I scrubbed the floor using a rotary machine fitted with a black scrubbing pad and plain water. The soiled solution was then removed using a wet vacuum before repeating the process on the other half of the floor. The tiled floor was then rinsed twice thoroughly before using a steamer to clean deep into the pores of the Victorian Tile.

Sealing Victorian Tiles

The next step was to Seal the Floor but it needs to be dry first, fortunately I have an industrial airmover fan that speeds this along nicely. The floor was sealed using 5 coats of Tile Doctor Seal and Go which provides stain protection along with a low sheen finish that really brings out the beauty in Victorian Floor tiles. The transformation was quite evident and the owner has very happy with the result and left the following testimonial.

“Fab Service, Great result, Will Recommend.”

Victorian Tiled Floor After Restoration Victorian Tiled Floor After Restoration

 

Victorian Tiled Floor Cleaned and Sealed in Lewisham

Victorian Tiled floor restoration in Lewisham Read More »

Victorian Floor Cleaned and partly Sealed in Richmond

Victorian Tiled Hallway Restoration in Richmond

Set of photographs here from a Victorian Tiled floor in a block of flats in Richmond Upon Thames. The floor was in the communal hallway and as a result had seen a lot of traffic and was looking very dull and in need of a good clean and re-seal.

Victorian Floor before cleaining in Richmond

Cleaning the Victorian Tiled Floor

The floor was cleaned using a dilution of Tile Doctor Pro-Clean which had been left to dwell for 20 minutes before being agitated using a rotary machine fitted with a black scrubbing pad. We use a wet vacuum to remove the dirty cleaning solution before thoroughly rinsing the floor down with clean water to remove any remaining cleaning product that might have an adverse effect on the sealer. The floor was left to dry assisted by the use of a warm air blower.

Victorian Floor Cleaned and partly Sealed in Richmond

Sealing the Victorian Tiled Floor

Having the right equipment can make light work of cleaning a large area and the blower meant we were soon looking at sealing the floor. The trouble with working in a communal area however is we had residents coming and going so we had to seal the floor in two halves. We used Tile Doctor Pro-Seal to seal the floor; it’s more expensive than some but gives a natural look whilst penetrating deeper into the tile to provide maximum stain protection, something you need in high traffic areas.

When the rest of the floor was completed and left to dry for an hour I used a rotary machine fitted with a white buffing pad to harden the floor up.

The managing agent was really pleased because she received a lot of calls from the residents to thank her as this floor hadn’t been cleaned and sealed for a lot of years.

Victorian Floor Cleaned Sealed in Richmond
 

Victorian Floor Cleaned and Sealed in Richmond Upon Thames

Victorian Tiled Hallway Restoration in Richmond Read More »

=================================

East Surrey Tile Doctor

================================= Read More »

Scroll to Top