We recently cleaned and sealed a small Travertine floor in a kitchen for a customer in Mortlake near Richmond upon Thames in Surrey. To be fair the floor wasn’t that bad, it was just a bit dirty because the customer had been told to use a steamer to clean the floor which was bad advice as the heat from the steam was breaking down the sealer and resulting in the tiles getting dirty.
![]() |
![]() |
Cleaning Travertine Kitchen Tile
I first applied a 50/50 mix of Tile Doctor Pro-Clean and Nanotech Ultra Clean leaving it to dwell on the tile for 15 minutes before scrubbing it in with a rotary Machine fitted with a brush head. Once I was satisfied the floor was clean it was thoroughly rinsed with clean water. The dirty solution removed using a wet vacuum and then left it to dry overnight.
![]() |
![]() |
Sealing Travertine Tile
The next day the floor had dried and we proceeded to seal it using two coats of Tile Doctor Colour Grow which as well as providing a good level of stain protection also brings out the natural colours in the stone. I always use a water test to determine if the right about of sealer has been applied, very simply you drop a small amount of water onto the stone and if it forms a bubble on the surface it’s sealed.
![]() |
![]() |
Before I left I provided the customer with a proper maintenance plan for the floor, and expect a call in around a years’ time to come and do a deep clean and seal. The customer was delighted with the results and said the floor looked better than when they had it laid.