You may recall a job I wrote about earlier in the year concerning a Limestone tiled floor in Westminster well I’m please to say the owner of that property was so pleased with my workmanship that I was asked back to maintain the Marble tiled bathroom which included a sink unit.
Maintaining Marble Tiles
Normally with polished stone it’s necessary to burnish the floor however in this case the tiles were in good condition with no scratches in the polish, there were a few spots and marks on the tile that needed to come off and they had lost some shine however a full burnish would not be necessary.
To remove the spots and marks I treated them first with a solution of Tile Doctor Pro-Clean diluted 4:1 with hot water. I then scrubbed them using a red buffing pad on my rotary floor machine, which took the marks away from the stone. Next I used a medium burnishing pad with a little water and followed with the fine pad and finally the ultra-fine burnishing pad to restore the shine and polish. I offered to build-up a durable polish with Tile Doctor Shine Powder however the owner was happy with the finish that had been achieved.
Sealing Marble Tiles
Once the tiles were dry I sealed them using Tile Doctor Colour Grow which is an impregnating sealer which occupies the pores of the stone and also enhances its natural colours in the process.
Once the floor had been done I carried out the same process on the Marble sink unit using small six inch pads with a hand polisher. All went well and as you can see from the water bubble test in the photograph below the floor is now fully sealed however there is more work to be done elsewhere in the house and the owner has now booked me in to clean all of the carpets.
Marble Tile Cleaning and Polishing in Westminster, London
I was asked by my local Indian restaurant in South Croydon if I could improve the look of their marble tiles in the reception area of the restaurant. They had been laid several years ago and now the sealer was failing and dirt was becoming ingrained in the tile and especially the grout which had gone dark.
Marble Tile and Grout Cleaning
To get the grout clean and remove the surface dirt we started with the application of a coarse grade diamond encrusted burnishing pad, the pad is used in conjunction with a little water which helps lubricate the process and it effectively cuts back the layer of grime from the surface. Rotary pads do struggle to reach into the grout lines so a medium dilution of Tile Doctor Pro-Clean which is a heavy duty tile and grout cleaner that’s safe to use on natural stone and grout was also scrubbed into the grout by hand using a stiff brush.
The floor was then rinsed to remove the now dirty water and cleaning solution and we moved on to polishing the floor using a medium grade, fine and then super fine pads to build the surface shine backup. The floor was rinsed with water in-between each pad and then dried out as thoroughly as possible using large air movers.
Sealing Marble Floor Tiles
Normally I would have finished off with the application of Tile Doctor Shine Powder to give it a mirror like finish but the owner was happy with the way it looked and so once the floor had dried we moved onto sealing it with two coats of Tile Doctor Colour Grow which is an impregnating sealer that works from the inside by occupying the pores within the stone, it also enhance the colours within natural stone.
The owner was over the moon with the results and has now engaged us to maintain the floor on a regular basis.
Cleaning and Polishing a Marble Tiled floor in a Surrey Restaurant
Following on from a referral from a Property Management company I paid a visit it to this palatial property in Oxshott which had approximately 300m2 of Marble tiled flooring that they wanted cleaning and re-polishing, my initial quotation to do this mechanically was too high so I offered an alternative using diamond encrusted burnishing pads which reduced the cost significantly. I didn’t receive an answer so I thought that was the end of it however five months later I got an email asking me to carry out the works.
Marble Tiled Floor Polishing
This was a very large area so we had two men working with burnishing pads in 10 metre sections. The pads come in a set of four; you start with the coarse pad together with a little water and this cuts through and removes surface grime and any surface seal. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish.
Fortunately there were not many stains and the ones that were there came out quite easily. When we had completed a room using this system we then applied Tile doctor Shine powder which is a crystallising power worked into the floor using a white buffing pad and a little water; it adds an extra level of deep shine to the marble floor giving it that extra wow factor together with a tough durable finish, we did this working 1 m2 at a time.
This whole process took five days to complete and when we had finished the client came to inspect it with the homeowner. She was delighted with the final finish and has said that she will be recommending us to all her friends and clients. This is also great for the property manager because it has given him a good reputation for providing a trustworthy and highly skilled contractor for the works. Also he has promised us further work from his other clients including a job to carry out the external stone cleaning works for the same client.
Cleaning and Polishing a Large Marble Tiled floor in Oxshott, Surrey
It’s not our local area but following a recommendation to this client by another customer we were asked to have clean and seal these Marble tiles in the hallway of a house in Farnborough.
Marble Tile Cleaning and Polishing
There was no sealer present on the Marble tiled floor so gave the floor a clean with a dilution of Tile Doctor Pro-Clean which is safe to use on stone floors, Pro-Clean is also very effective on grout so we took the opportunity to get into the grout lines as well. Once we were happy with the tile and grout we removed the soiled cleaning solution using a wet vacuum and washed the floor down with clean water.
The next step was to use a set of diamond encrusted burnishing Pads fitted to a rotary buffing machine to polish the floor. The pads come in a set and are very effective at restoring the shine back on Marble, Limestone and Travertine etc.
Sealing Marble Tiles
Once the floor was polished we applied two coats of Tile Doctor Ultra-Seal which provides a high level of surface protection whilst maintaining the natural look of the Marble tiles. Once the sealer had dried we buffed the floor again using a white polishing pad.
I’m, afraid I forgot to take any photographs before we started cleaning so you can see the difference we made to the floor, needless to say however the customer was very happy with the results
Marble Floor Tiles and Grout Refreshed in Farnborough
These photographs were taken at a house in Forestdale near Croydon in Surrey where we were engaged to clean and buff a dull Marble tiled floor; we were also asked to re-colour the grout which had become stained.
Marble Tiled Floor Polishing
We used a set of diamond encrusted Twister Burnishing Pads fitted to a rotary buffing machine to polish the floor. The pads come in a set of four; you start with the Red pad together with plain water and this cuts through and removes surface grime and any surface seal. You then progress through one by one until you get to the final Green polishing pad which provides a high polish.
After this I mixed some Tile Doctor Shine crystallising powder with water, the Shine product provides a very high shine and tough durable finish. I used a White |Buffing pad to work the Shine powder into the tiles. After five minutes the residue was removed using a wet vacuum and I used the opposite side of the white pad and some plain water and carried on for another five minutes. Once complete I vacuumed the remaining water off and then with a clean dry white pad buffed up the floor to leave a deep lasting shine.
Recolouring the Grout
The last step was to refresh the grout using a tube of White Grout Colour applied with a toothbrush and then left for a couple of hours before using a white scrubbing pad and a little water spray to remove excess colourant. When I had finished the owner of the house said the floor looked better than it did when it was first laid.
Marble Tile Floor Polish and Grout Refresh in Forestdale, Surrey