I was asked to clean and reseal this Honed Travertine flooring in Kensington, London which ran through the ground floor area and to a small area in the basement. The floor had been laid nine years prior and had only had regular washing by the housekeeper and was now overdue a deep clean and re-seal..
Deep Cleaning Travertine Tiles
It was a large area so it was necessary to work in sections which had the added complication of having to move the customer’s furniture around.
With each area I scrubbed the floor with a rotary machine fitted with a medium brush head and a hot 3:1 dilution of Tile Doctor Pro-Clean. I scrubbed it in and left it for 10 minutes before scrubbing again then vacuumed it away with a wet vac. I then checked all the grout lines were clean in case the brush head had missed any.
Next I fitted a pad holder to the rotary machine and using a medium grade burnishing pad scrubbed the area again, I then followed this up with the fine grade pad to build a nice sheen on the stone to match the customers’ requirements.
During the cleaning process it became evident that some of the Travertine tiles had holes in them, it’s possible they had been this way when supplied but it’s also possible that they had been worn through by the use of an acidic cleaning solution. so after once the tiles were cleaned and polished I filled in the holes with a matching filler.
Sealing Travertine Floor Tiles
The next step was to seal the Travertine to protect it from future staining and for this I used Tile Doctor Colour Grow which is a colour enhancing impregnating sealer that occupies the pores in the stone. In total I had to use three coats on sealer on the stone due to its porosity. I finally buffed the floor using a white soft buffing pad; this was to take off any seal left sitting on the surface of the stone and helps to work it in.
In total it took four days to do this job and the customer was really happy with the result and left a very nice testimonial on the Tile Doctor website.
Travertine Floor Cleaned, Polished and Sealed in Kensington
I recently carried out a clean and diamond polish of a Travertine tiled floor in Surbiton for a customer who had been fed up with the floor since she and her husband had moved in 2 years ago. The floor was the last job on their list of things to be done and they wanted to make sure that it was done properly as unfortunately in the past they have fallen prey to unscrupulous tradesmen who had not lived up to expectations.
When I was asked to quote I explained what I would do and showed pictures of previous work, and also my Trustmark Accreditation. They had also researched my work through my website and through the work history where there are lots of examples of Travertine tiles I have worked on in the past. I received the work order the next day and booked the job in for three weeks after.
Stripping and Polishing Travertine Tiles
I arrived at the agreed date and time and was pleasantly surprised to see that they had put sheeting around all of their kitchen units and skirting so all I had to protect was the wooden flooring next to the travertine.
My first job was to scrub the floors Using Tile Doctor Pro Clean to get rid of any ingrained dirt and clean the grout, the soiled cleaning solution was then removed using a wet vacuum and we moved onto burnishing the stone. This is done using a rotary scrubbing machine fitted with a coarse diamond encrusted burnishing pad and a little water began to strip off the old dirt and seal from the floor, the resulting slurry was then removed using a wet vacuum. The burnishing pads come in a set of four so once we were done with the coarse pad we moved on to the Medium pad which is the first step in the polishing process.
At this point I could see more work was required to improve the grout which was done using a combination of pressurised steam, more Tile Doctor Pro-Clean and a stiff brush. Once I had removed all the dirt and old seal from the grout I went on to the next stage of polishing and used the fine pad finally moving on to the extra fine pad to give the floor that extra deep shine.
Sealing Travertine Floor Tiles
Once the floor was dry we set about sealing it using two coats of Tile Doctor Colour Grow which is a colour enhancing impregnating sealer designed to provide maximum stain protection on natural stone floors whilst bringing out the colour in the stone. After the second coat was applied I waited 10 minutes before buffing any excess residue with a white buffing pad.
I offered the customer the option of creating a higher shine by applying Tile Doctor Shine Powder to give it a mirror polish but she declined as she was more than happy with the finish. Overall the floor came out really well and I found it quite a humbling experience as she was constantly saying thank you due to the fact that she had been messed about by previous contractors so was quite relieved to find someone who could actually do the job properly.
Travertine Floor Cleaned, Polished and Sealed in Surbiton
We recently cleaned and sealed a small Travertine floor in a kitchen for a customer in Mortlake near Richmond upon Thames in Surrey. To be fair the floor wasn’t that bad, it was just a bit dirty because the customer had been told to use a steamer to clean the floor which was bad advice as the heat from the steam was breaking down the sealer and resulting in the tiles getting dirty.
Cleaning Travertine Kitchen Tile
I first applied a 50/50 mix of Tile Doctor Pro-Clean and Nanotech Ultra Clean leaving it to dwell on the tile for 15 minutes before scrubbing it in with a rotary Machine fitted with a brush head. Once I was satisfied the floor was clean it was thoroughly rinsed with clean water. The dirty solution removed using a wet vacuum and then left it to dry overnight.
Sealing Travertine Tile
The next day the floor had dried and we proceeded to seal it using two coats of Tile Doctor Colour Grow which as well as providing a good level of stain protection also brings out the natural colours in the stone. I always use a water test to determine if the right about of sealer has been applied, very simply you drop a small amount of water onto the stone and if it forms a bubble on the surface it’s sealed.
Before I left I provided the customer with a proper maintenance plan for the floor, and expect a call in around a years’ time to come and do a deep clean and seal. The customer was delighted with the results and said the floor looked better than when they had it laid.
Resolving Travertine steam cleaning problems in Surrey
A regular customer of mine in Beckenham was having some work done in his house and insisted the builder use my services to seal their newly laid travertine tiled floor. We do see a lot of installation problems at Tile Doctor so I can only commend his foresight.
Cleaning Travertine Tile
Once the floor was laid I gave the Travertine tiles a thorough clean to remove dirt and grout residue using Tile Doctor Pro-Clean followed by a rinse with water. A rotary machine fitted with a scrubbing pad and wet vacuum come in very handy at this point.
Sealing Travertine Tile
When the Travertine tile was dry it was buffed up using a rotary machine fitted with a Green Twister pad before sealing with two coats of Tile Doctor Ultra-Seal which is a no-sheen penetrating sealer which gives a natural look. Once the sealer was dry it was buffed again, this time using a white buffing pad.
The builder was surprised at how well it came out and the work involved, he now recommends me to other clients.
My customer now has me back to buff the floor on a regular basis.
These travertine wall tiles were laid in a brick pattern in a large shower cubicle in a house in Wandsworth, South London. As you can see the tiles hadn’t been cleaned for a couple of years and had become discoloured from the shampoo dyes etc, there was also some mould which is a common problem in wet areas and usually down to insufficient ventilation. The owner wanted to sell her house and was keen to get the shower looking like new again.
Cleaning Travertine Wall Tiles
We cleaned the Travertine wall tiles using a dilution of Tile Doctor Pro-Clean. It’s always best to leave Pro-Clean to dwell for a few minutes before cleaning so it can get to work on the dirt, as you would expect however liquids will simply run down a wall tile so the trick here is to apply the solution using a spray attachment; the idea behind this is to combine the product with air so it becomes lighter and sticks to the tile. Then next step is to get in with a small stiff scrubbing brush and really work the solution into the tile and grout and loosening the dirt along the way and the wash the wall down with water to remove any cleaning products.
Sealing the Travertine Wall Tiles
The wall was wiped down and allowed to dry for before applying the sealer. There are a number of products you can use for sealing Travertine and in this case I used Tile Doctor Ultra Seal which provides stain protection without changing the appearance of the tile. The last step was to remove and replace the silicone seal between the Travertine tile and the shower tray, there was some mould build up on the original silicone which wants it gets a hold into the silicone it cannot be removed and so it’s always best to replace. At the end I had one happy customer and I think you will agree I achieved the aim of making it look like new again.