limestone floor Archives - East Surrey Tile Doctor

Limestone Kitchen Floor Cleaning and Polishing Oxted

Large Tiled Floor Cleaned, Polished and Sealed in Oxted

Pictured below is a large Limestone tiled floor in the Kitchen and adjacent living space at a house in Oxted. The tiles were looking quite dull, and the grout had darkened with ground in dirt so I was asked to give them a deep clean and polish to restore the beauty and character to the floor.

Limestone Kitchen Floor Before Cleaning Oxted

Limestone is a very tough stone so to clean the tile and rebuild the polish it needs to be polished using a set of burnishing pads which use different grades of diamond encrusted pads to cut through ingrained dirt and build up the polished appearance. Then I always recommend sealing the tiles to protect them from ingrained dirt and stains.

Secondly, it was a large extensive space and although the tiles were of a standard size it took a large number of them to fill the space resulting in what felt like miles of grout lines, all of which would need scrubbing to get them clean.

Cleaning Limestone Tile and Grout

Before working on the Limestone tiles, I decided to treat the grout to a good old-fashioned scrub with a strong solution of Tile Doctor Pro-Clean and stiff wire brush. I knew this was going to take some time so called in my son to provide some extra manpower. He’s young so can scoot around on the floor all day without feeling it later. The grout soon become much cleaner, and the soiled cleaning solution was then rinsed away with water and then extracted with a wet vacuum.

After a well-deserved, lunch we bought in a floor burnishing machine which was fitted with extra iron weights to help it get more traction on the tiles. The first step in burnishing the Limestone tiles involves the use of a coarse 400-grit pad which is designed to deep clean the stone and strip away any remaining sealer. The pad is fitted to the machine and run over each tile several times using only water to lubricate the process.

Once I’d removed any excess residue with the wet-vacuum, I changed to a medium 800-grit pad, repeated the cleaning process, and again extracted the soiled residue. This is followed by a finer 1500-grit using the same process and then finally a super fine 3000-grit pad which really brings up the polish on the tile and is applied using a small amount of water sprayed onto the stone.

By the end of the first day the floor was already looking so much cleaner and lighter.

Sealing Limestone Floor Tiles

After leaving the floor to dry off overnight I returned to the property the next day to apply the sealer. Before starting though I gave the floor a quick skim over with an old pad to make sure it was completely clean before sealing.

To seal the Limestone, I applied two coats of Tile Doctor Ultra Seal which is an impregnating sealer that soaks into the pores of the Limestone to provide durable protection against ingrained dirt without changing the natural look of the tile.

After an hour, I gave the floor a buff with a soft white pad to remove any excess sealer and further bring up the appearance of the stone. Once complete the Limestone had a nice subtle shine and the grout was back to its white colour resulting in the whole floor looking much healthier and attractive.

Limestone Kitchen Floor After Cleaning Polishing Oxted

For aftercare maintenance of polished stone floors, I recommend the use of a cleaning product called Tile Doctor Stone Soap. It’s a gentle but effective floor cleaning product that’s safe to use on sealed floors and helps to maintain the patina on the tile. If looked after correctly this sealer should last three to four years.

Professional Maintenance of a Honed Limestone Floor Tiles in East Surrey

Large Tiled Floor Cleaned, Polished and Sealed in Oxted Read More »

Limestone Kitchen Floor and Shower Tiles Refinished in Wandsworth

1 Comment / Leatherhead Tile Cleaning, Limestone Tile Cleaning and Polishing / TileProf

Sometimes, Tile Doctor customers will have more than one tiled area in need of professional maintenance. At this house in Wandsworth, South London; I was commissioned to clean and seal firstly a Limestone tiled kitchen floor, and a Limestone tiled shower unit.

Limestone Floor Before Cleaning Wandsworth

Cleaning and Sealing a Limestone Kitchen Floor

I started with the Limestone tiled kitchen floor which, like many other stone floors had not been treated to the correct regular care and had become dull and dirty over time as a result.

My first task involved applying Tile Doctor Remove & Go stripper in order to break down any old surface sealant and dirt. Then, I began the burnishing process, which essentially involves polishing with pads of varying grit. I started with a Medium 800 grit burnishing pad to provide an initial polish and grind away ingrained dirt, before refining this with a Fine 1500 grit pad to achieve a smooth surface. The burnishing pads are used in combination with a small amount of water.

Limestone Floor During Cleaning Wandsworth

After leaving the floor to dry for 24 hours, I sealed the tiles with Tile Doctor Colour Grow. This will provide durable surface protection for the future and also further accentuate the great natural shades in the Limestone. To add the finishing touches, I buffed the floor with a soft white buffing pad.

Limestone Floor After Burnishing Wandsworth

Cleaning and Sealing a Limestone Tiled Shower Unit

During the time it took for the Limestone tiled kitchen floor to dry, I set my sights on tackling the shower unit. The unit was suffering from a terrible amount of limescale, which would need to be removed using a set of hand held burnishing pads. Limescale deposits build up on surfaces which come into contact with hard water, and can become very unsightly if not dealt with promptly.

Limestone Shower Tiles Before Cleaning Wandsworth

This proved to be a more awkward job thanks to the intricate Limestone fittings on the shower walls. I used the smaller 6-inch burnishing pads fitted to a hand buffer, while for the kitchen floor I naturally used the larger sized pads attached to a heavy weight buffing machine.

With the limescale as bad as it was, I started to grind it off with a Very Coarse 120 grit burnishing pad, before working my way up gradually through the system of pads – each time using a slightly finer grit pad until I finished with the Ultra Fine 3000 grit pad and the surface finish had been restored.

Limestone Shower Tiles After Cleaning Wandsworth

Following this, I removed the silicone sealant around the shower fittings, and dealt with the mould growing behind it.

On the second day of work, I sealed both the kitchen floor and the shower unit. Much like the kitchen floor, the shower unit was sealed using Colour Grow to ensure long lasting protection, and fresh silicon was also fitted.

Two days of work and two rejuvenated Limestone features later, I was left with a very happy customer.

Limestone Shower Tiles Before and After Cleaning Wandsworth

Restoring the appearance of a Limestone Kitchen Floor and Shower in South London

Limestone Kitchen Floor and Shower Tiles Refinished in Wandsworth Read More »

Limestone Tiled Kitchen Floor Cleaned and Polished in Knightsbridge

1 Comment / Leatherhead Tile Cleaning, Limestone Tile Cleaning and Polishing / TileProf

Details below of a Limestone Tiled Floor we cleaned and polished in the kitchen of a flat in Knightsbridge, the customers were waiting to move into their new home and the kitchen floor was dirty, especially after they had some new tiles fitted and looked out of place.

They had other companies in to quote but were not impressed by their knowledge of how to clean the floor, and one large London based company sent some people to do a test patch with completely inappropriate equipment and failed to make any difference at all. Sorting out natural stone floors is what we do for a living so and although I was unable to carry out a demo on this occasion I managed to get the job by answering all their questions in detail setting realistic expectations without promising the earth and showed them pictures from a portfolio of work we had done before.

Limestone Tiled Floor Kensington Before and After Cleaning

Stripping and Polishing Limestone Floor Tiles

Before starting to clean the floor we removed the plinths from the kitchen units and then using a rotary scrubbing machine fitted with a coarse diamond encrusted burnishing pad and a little water began to strip off the old dirt and seal from the floor, the resulting slurry was then removed using a wet vacuum.

The burnishing pads come in a set of four so once we were done with the coarse pad we moved on to the Medium and then Fine pads again with a little water until the floor was polished. The Next step was to use Tile Doctor Pro-Clean along the grout lines with a stiff brush to get the grout clean as well.

To bring up the polish on the Limestone tiles the last “Very Fine” pad was fitted to the rotary machine and run over the floor to buff it to a nice shine.

Sealing Limestone Floor Tiles

Once the floor was dry we set about sealing it using two coats of Tile Doctor Colour Grow which is a colour enhancing sealer designed to provide maximum stain protection on natural stone floors whilst bringing out the colour in the stone, this was followed with a final buff with a soft white pad.

The customers were really pleased with the finish and pleased that they chose a Tile Doctor to do the work. I should mention that they were not expecting to be able to see the new and the old tiles blend and were really happy that we could achieve this for them.

Limestone Floor Cleaned, Polished and Sealed in Knightsbridge

Limestone Tiled Kitchen Floor Cleaned and Polished in Knightsbridge Read More »